Why can't the Slide Rail Drawer be Pushed in Half Way?

In order to facilitate the opening and closing of the drawer, slide rails are generally installed on the drawer, but the drawer slide rails will inevitably have some problems after being used for a long time, such as: halfway stuck, unable to open, etc., then the slide rail drawer cannot be pushed halfway Why did you go in? Let's learn it with Drawer Fittings Manufacturer.

Undermount Installation Concealed Slide

Why can't the slide drawer be pushed in half way?

There are many reasons why the drawer of the slide rail cannot be pushed in half, and the treatment methods are also different, as follows:

1. The drawer of the slide rail cannot be pushed in by half. It may be caused by the lack of lubricant on the slide rail. At this time, just drop some lubricant on the stuck position on the slide rail.

2. The drawer of the slide rail cannot be pushed in by half. It may be caused by the misalignment of the balls on the drawer and the rail of the slide rail. At this time, just lift the drawer up and then push it in.

3. The drawer of the slide rail cannot be pushed in half of the way. It may also be caused by damage to the slide rail. At this time, you need to purchase a slide rail of the same specification and model for replacement. If the owner will not replace the slide rail, it is best to find a professional installer to help replace it.

4. If it is determined that the slide rail balls are not misaligned with the track, and the drawer cannot be pushed in after using lubricating oil, then it may be caused by the deformation of the drawer. At this time, you need to use relevant tools to move the drawer slide. Disassemble it, then conduct a detailed inspection of each part of the drawer, and then take appropriate measures to deal with it.

5. When installing and disassembling the drawer slide, you must master the correct installation and disassembly steps, otherwise it will easily cause the drawer slide to fail to open or get stuck. At this time, it is generally necessary to remove the drawer slide Re-installation will bring unnecessary problems and troubles.

The above is a detailed introduction about why the drawer of the slide rail cannot be pushed in half way. I hope it can help everyone. It is recommended that you must master the correct installation and removal methods of the drawer slide rail, so that you can effectively avoid the phenomenon that the slide rail drawer cannot be pushed in by half.

Our company also has Undermount Installation Concealed Slide on sale, welcome to contact us.