As a Full Extension Drawer Slide Wholesale, share it with you. In addition to
careful selection of hinges for cabinet hardware, the choice of cabinet drawer
slides should also be paid attention to. Inferior drawer slides not only affect
the use, but also cause damage to the cabinet.
Full Extension Drawer Slide
Different types of drawer slides
Inside the cabinet slide is its bearing structure, which is directly related to its load-bearing capacity. Commonly used in the market are roller slides, steel ball slides, damping slides, silicon roller slides, etc. Different styles of internal structure design are different, and the load-bearing, stability and smoothness of use are also different.
The steel ball slide rail automatically removes dust and dirt on the slide rail through the rolling of the steel ball, so as to ensure the cleanliness of the slide rail, and the sliding function will not be affected by the dirt entering the interior. At the same time, the steel ball can spread the force around, ensuring the horizontal and vertical stability of the drawer.
The damping slide rail is designed with hydraulic deceleration, which can effectively reduce the impact force, so that the drawer will not close suddenly and cause damage to the furniture. And there will be no noise when switching, forming a soft and silent comfort. The drawer installed with the damping slide rail is very good to use when closed, and has a long service life, without maintenance.
Damping slide drawer installation steps
Step ① Measure the depth of the drawer before installation, and choose the size of the damping slide according to the depth of the drawer. At the same time, pay attention to the screw installation data and reserve the screw installation position.
Step ② After measuring the depth of the drawer and determining the size of the damping slide rail, drill holes on the side of the drawer as required for installation. When drilling holes, determine the installation position to avoid deviation.
Step ③ After the preparatory work is completed, start to install the damping slide rail, first install the slide rail on the drawer side panel, and tighten the screws with a screwdriver. After installation, try to see if it can be shaken with your hands. It is better to be stable and not move.
Step ④ Install the slide rails on the side panels of the counter, and make sure to keep the same level with the drawer slide rails during installation, otherwise the drawer cannot be installed normally. After installation, install the drawer and try to open and close it for several times. If there is noise or obstruction, adjust it and use it without obstruction.
Selection of drawer slides
Even if the low-quality slide rail feels good in the short term, it will be difficult to push and pull after a longer time. When selecting, the drawer can be completely drawn out, and its structure and the specific structure of the part in contact with the sliding rail can be clearly seen from the bottom, and the thickness of the drawer side panel can also be observed.
Our company also has Full Extension Drawer Slide on sale, welcome to contact us.
