As a Kitchen Fittings Hinge Wholesale, share with you.
China Drawer Slide belongs to furniture accessories. There are many types. Professional furniture factory technicians will know how to choose slide rails. When you want to assemble furniture, there will be questions about how to choose a slide rail. How to choose a suitable slide rail? Buy What do you need to know about the drawer slide? Let's take a look at it with you.
1. You need to know the depth of the cabinet. The length of the drawer slide is shallower than the depth of the cabinet. For example, the depth of the cabinet is 450mm. The drawer slide can be 400mm long.
2. Choose the specifications of the slide rail according to the length of the drawer you want to pull out. If you want to pull out the drawer completely, choose three drawer slides and three drawer slides.
3. The drawer slide also has a damping function (the drawer will automatically suck back when it is closed quickly, and it also achieves a very good mute effect) and a rebound function (the drawer does not need to be equipped with a handle, press the drawer panel, the drawer will pop up , When the drawer is closed, press the panel again, the drawer will be locked), and we can buy the drawer slide rail according to the desired function.
In the hardware industry slide rail, the thickness of the three-section slide rail commonly used in ordinary drawers is generally 1.0 * 1.0 * 1.2mm, and the higher grade is 1.2 * 1.2 * 1.4mm. This is the thickness of the standard three-section slide rail, and the heavy three-section The thickness of the slide rail will be a little thicker. However, some slide rail manufacturers, in order to save the cost of the slide rail, have produced slide rails with a material thickness of 0.8mm, 0.7mm or even 0.6mm. When the thickness of the slide rail is thinner, its load-bearing capacity will be lower. The thickness of the material will not only affect the load capacity of the slide rail but also directly affect the quality of the slide rail. The material is too thin, the overall effect of the slide rail and quality will be discounted.
So when choosing a hardware slide, don't let the quality of the entire product be affected in order to save a little cost.
Most industrial slide rails are made of steel or cast iron. In the long-term use process, due to the different degrees of friction between the two contact surfaces, it will cause different levels of scratches and strains on the surface of the slide rail, which will seriously affect the equipment. Processing accuracy and production efficiency. The problem of scratches and strains on machine tool slides can be solved with polymer composite materials. Due to the material's excellent adhesion, compressive strength, and oil and abrasion resistance, it can provide a long-lasting protective layer for parts. It only takes a few hours to repair the scratched part of the guide rail, and the cost is lower.
Our company also has Concealed Hinge on sale, welcome to consult.