Home > News

How to Install Curtain Track?

Jul. 17, 2020
Share:

As a Drawer Slide Manufacturers China, share with you. When the decoration is nearing completion, you can start buying curtains in your home. In the soft decoration project, curtains are a very important link. Choosing the right curtains can add more color to our home life. So how much do you know about curtain installation? The following editor will take you to take a look at the curtain installation method and related precautions.

China Drawer Fittings

China Drawer Fittings

1. Stroke positioning. To prevent the distance between the fasteners from being too large and unable to withstand the pulling force, first measure the size of the required mounting rails, and then calculate the fixed hole spacing. Generally, the spacing between the fixing pieces is not more than 50 cm, and then draw a line to locate the curtain rail. Success or failure lies in the accuracy of positioning.

2. Install the firmware. Generally, the mounting fixture needs to be expanded with screws for the roof or concrete wall.

3. Wear a pulley. When the window width is greater than 1200 mm, the curtain rails should be disconnected, the simmer bends at the disconnection should be staggered, the simmer bends should be gentle curves and the overlap length should be greater than 200 mm.

4. After the slide rail is installed with the pulley, in order to prevent the pulley from rolling out of the track and to avoid the sharp corners at both ends of the track from scratching the front, so both ends of the window rail need to be sealed with a sealing plug, and then used The screw secures the seal.

5. Insert the curtain track of the worn pulley into the slot of the firmware, and then lay the lifting clips so that the track and the firmware's lifting clips are at 90 degrees. Tighten the lifting clips with screws to tightly hold the curtain rails. At this time, the curtain rails are almost installed.

6. There is also a rail that can be bent. Because some windows have corners, it is best to use curved rails. The installation method is basically the same as the previous one, but there are more brackets in the middle, especially for the kind of thick fabric curtains to prevent falling off.

7. If it is a Roman pole installation, first fix the bracket on the top, or the window opening but the curtain ring on, but the curtain rod directly, press it inwardly, when you hear the sound of the card rubbing, it means that you have pressed Go in and install

Our company also has China Drawer Fittings for sale, please contact us.