In many homes, drawer slides are often broken, and Slide for Metal Drawer disassembly also requires a certain method and different disassembly methods are required according to different drawers. Only by using the right method,
way. To achieve the perfect disassembly process, otherwise, the track or drawer will be damaged.
Everyone usually has this question: The Concealed Slide at home is broken and I want to disassemble it, but I don't know how to deal with it? As a Ball Bearing Slide Manufacturer, share with you.
How to remove the drawer track Answer one:
Concealed Slide
First of all, we need to determine what kind of rails are at home, such as three sections of tracks, two sections of tracks. If it is a three-section track, you should first pull the cabinet out gently. When you pull it upside down, you must carefully check whether a sharp object will leak on both sides of the cabinet, usually on both sides Have. (This kind of sharp thing is usually called a plastic bullet card) Then try to press the plastic bullet card thing twice down hard, you can understand the crisp sound when you press it, and this time Instructions are open. This makes it easy to remove the cabinet. Be sure to keep the cabinet in a horizontal position when removing it. Do not use too much force, otherwise the rails on both sides will be damaged. After making adjustments, install it in a suitable position.
How to remove the drawer track Answer two:
First, the cabinet must be easily pulled out, but it must be kept in a stable state when pulled out, so that it will not hurt the cabinet and the track when it is pulled out. Check to see if there are sharp buttons on both sides of the cabinet. If you see them, try to press down with your hands. If you can press it, you will hear a click. Then remove the cabinet. But don't press too hard when pressing it. If you don't understand it, something is stuck, you need to check it. After pressing it, take it out gently and keep it flat so that it won't hurt the track too much. After pulling it out, verify that the drawer's rails are deformed, or other circumstances occur. If deformation is encountered, the position of the deformation is usually adjusted, and it is installed and fixed. Into this, it can easily complete the removal and installation of the drawer slide rails.
